# This is the Prefix for your PXE Knife environment.
# This Basically lets it know where things live in relation to the root directory
# If you follow the instructions on http://pxeknife.erebor.org this will likely be
# /pxeknife, for example
PXEKNIFEPREFIX=/pxeknife

#
# Centos
#
# CENTOS defines which versions of Centos you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- 5
# 		- 5.1
# 	- Specific version number w/ architecture
# 		- 5.x86_64
# 		- 5.i386
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i386		- Snag all version that are 32-bit
# 		all.x86_64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i386	- Snag all current versions that are 32-bit
# 		all_current.x86_64	- Snag all current versions that are 64-bit
# 		all_vault		- Snag all vault versions, both 32-bit and 64-bit
# 		all_vault.i386		- Snag all vault versions that are 32-bit
# 		all_vault.x86_64	- Snag all vault versions thare are 64-bit
# 		all_ancient		- Snag all 'Ancient' versions (these are only 32-bit)
# 		all_ancient.i386	- Snag all 'Ancient' versions (these are only 32-bit)
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		CENTOS = 5.1 5.2.i386 all_ancient
#
# 	Note: If left blank this disables Centos

CENTOS = all

# CENTOSMETHOD provides a mechanism to provide the installer with various additional command line
# options
# this *WILL* start out with 
# 	method=<CENTOSMETHOD>
# 	Options include:
# 		- @URL@ - this will fill in the base URL from which is found the installer
# 		- @VERSION@ - the numberic version of the installer
# 		- @ARCH@ - the architecture that your installing
# 		- @MAGICURL@ - this will use a known - predefined path for what your
# 			       using, based on the base URL.  This *HIGHLY* assumes 
# 			       your either using this with the default URLs, or that
# 			       you have changed them to match a full mirror of the distro
#
# 	You can tack on additional options should you choose, like ip=dhcp so that a user
# 	is not asked for their IP address settings.
#
# 	If this is left blank, askmethod is substituted
#
# 	see http://fedoraproject.org/wiki/Anaconda/Options for most options used by Anaconda,
# 	though keep in mind this list may not be accurate for all versions of the distro.

CENTOSMETHOD = @MAGICURL@ ip=dhcp

#
# Fedora
#
# FEDORA defines which versions of Fedora you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- 9
# 		- 10
# 	- Specific version number w/ architecture
# 		- 9.x86_64
# 		- 10.i386
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i386		- Snag all version that are 32-bit
# 		all.x86_64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i386	- Snag all current versions that are 32-bit
# 		all_current.x86_64	- Snag all current versions that are 64-bit
# 		all_archive		- Snag all archive versions, both 32-bit and 64-bit
# 		all_archive.i386	- Snag all archive versions that are 32-bit
# 		all_archive.x86_64	- Snag all archive versions thare are 64-bit
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		FEDORA = 5.1 5.2.i386 all_current
#
# 	Note: If left blank this disables Fedora

FEDORA = all

# FEDORAMETHOD provides a mechanism to provide the installer with various additional command line
# options
# this *WILL* start out with 
# 	method=<FEDORAMETHOD>
# 	Options include:
# 		- @URL@ - this will fill in the base URL from which is found the installer
# 		- @VERSION@ - the numberic version of the installer
# 		- @ARCH@ - the architecture that your installing
# 		- @MAGICURL@ - this will use a known - predefined path for what your
# 			       using, based on the base URL.  This *HIGHLY* assumes 
# 			       your either using this with the default URLs, or that
# 			       you have changed them to match a full mirror of the distro
#
# 	You can tack on additional options should you choose, like ip=dhcp so that a user
# 	is not asked for their IP address settings.
#
# 	If this is left blank, askmethod is substituted
#
# 	see http://fedoraproject.org/wiki/Anaconda/Options for most options used by Anaconda,
# 	though keep in mind this list may not be accurate for all versions of the distro.

FEDORAMETHOD = @MAGICURL@ ip=dhcp

#
# Debian
#
# DEBIAN defines which versions of Debian you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- Debian5.0
# 		- Debian-3.1
# 	- Specific version number w/ architecture
# 		- Debian5.0.amd64
# 		- Debian-3.1.i386
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i386		- Snag all version that are 32-bit
# 		all.amd64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i386	- Snag all current versions that are 32-bit
# 		all_current.amd64	- Snag all current versions that are 64-bit
# 		all_archive		- Snag all archive versions, both 32-bit and 64-bit
# 		all_archive.i386	- Snag all archive versions that are 32-bit
# 		all_archive.amd64	- Snag all archive versions thare are 64-bit
#
#	Note: Debian is has some issues with it's numbering schema, please pay close attention
#		- Please look at http://mirrors.kernel.org/debian/dists/ or http://archive.debian.org/debian-archive/debian/dists/
#		  to find the exact format of the version you are looking for, but the general rule seems to be:
#			- Before Debian 5.0 & 4.0r7 the format is Debian-<version number>
#				- Debian-0.93R6
#				- Debian-1.1
#				- Debian-2.0
#				- Debian-3.1
#			- After 5.0 and 4.0r7 the format seems to have changed to Debian<version number>
#				- Debian5.0
#				- Debian4.0r7
#		- Also note you can use the canonical names for releases like:
#			- sarge
#			- woody
#			- slink
#			- rex
#			- potatoe
#			- buzz
#			etc
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		DEBIAN = buzz sarge.i386 all_current Debian-093R6.amd64
#
# 	Note: If left blank this disables Debian

DEBIAN = all

#
# UBUNTU
#
# UBUNTU defines which versions of UBUNTU you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- edgy
# 		- hardy
# 	- Specific version number w/ architecture
# 		- hardy.amd64
# 		- edgy.i386
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i386		- Snag all version that are 32-bit
# 		all.amd64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i386	- Snag all current versions that are 32-bit
# 		all_current.amd64	- Snag all current versions that are 64-bit
# 		all_archive		- Snag all archive versions, both 32-bit and 64-bit
# 		all_archive.i386	- Snag all archive versions that are 32-bit
# 		all_archive.amd64	- Snag all archive versions thare are 64-bit
#
#	Note: Ubuntu unfortunately doesn't make it easy to figure out the numberic 
#	      releases from their diretory structure, at this time only the name of
#	      the release is available
#			- hardy
#			- warty
#			etc
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		Ubuntu = hardy warty.i386 all_current fiesty.amd64
#
# 	Note: If left blank this disables Ubuntu

UBUNTU = all

#
# Red Hat
#
# REDHAT defines which versions of Red Hat you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- 5
# 		- 5.1
# 	- Specific version number w/ architecture
# 		- 5.x86_64
# 		- 5.i386
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i386		- Snag all version that are 32-bit
# 		all.x86_64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i386	- Snag all current versions that are 32-bit
# 		all_current.x86_64	- Snag all current versions that are 64-bit
# 		all_vault		- Snag all vault versions, both 32-bit and 64-bit
# 		all_vault.i386		- Snag all vault versions that are 32-bit
# 		all_vault.x86_64	- Snag all vault versions thare are 64-bit
# 		all_ancient		- Snag all 'Ancient' versions (these are only 32-bit)
# 		all_ancient.i386	- Snag all 'Ancient' versions (these are only 32-bit)
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		REDHAT = 5.1 5.2.i386 all_ancient
#
# 	Note: If left blank this disables Red Hat
#
# 	Note: These are the *OLDER* Red Hat versions prior to RHEL and the separation of
# 	      Fedora into a separate project.  These seem to all be i386 only, thus the .x86_64
# 	      monikers will likely fail with errors as they targets do not exist.  Also noting
# 	      that these are *OLD* releases at best, and thus the *_current don't actually apply
# 	      to anything, as there is nothing current ;-)
#
# 	      Further noting that Version 6.* are the only versions in ancient and 7-9 are present
# 	      in vault.  Before 6 do not seem to support any network instalation.

REDHAT = all

#
# ARCHLINUX
#
# ARCHLINUX defines which versions of ArchLinux you wish to have available this can be:
# 	- Specific version number E.G.:
# 		- 0.7.2
# 		- 2007.08
# 		- latest
# 	- Specific version number w/ architecture
# 		- 0.7.2.i686
# 		- 2007.08.x86_64
# 		- latest.i686
# 	- Along with the following 'special' cases:
# 		all			- Snag all versions, both 32-bit and 64-bit
# 		all.i686		- Snag all version that are 32-bit
# 		all.x86_64		- Snag all versions that are 64-bit
# 		all_current		- Snag all current versions, both 32-bit and 64-bit
# 		all_current.i686	- Snag all current versions that are 32-bit
# 		all_current.x86_64	- Snag all current versions that are 64-bit
# 		all_archive		- Snag all archive versions, both 32-bit and 64-bit
# 		all_archive.i686	- Snag all archive versions that are 32-bit
# 		all_archive.x86_64	- Snag all archive versions thare are 64-bit
#
# 	Note: This is a space delimited list, quotes are not needed E.G.:
# 		Ubuntu = 0.7.2 latest.i686 all_current 2007.08.x86_64
#
# 	Note: If left blank this disables Archlinux

ARCHLINUX = all

MEMTEST86PLUS = latest

MEMTEST86 = latest

SUPERGRUBDISK = latest

TOMSRTBT = latest

RIP = latest

NTPASSWORD = all

PCISNIFFER = latest
